The Invacare HomeFill Oxygen System has changed the life of ambulatory oxygen patients by allowing them to fill their cylinders from their Invacare 5-liter and 10-liter concentrators. Patients enjoy the freedom and independence with an unlimited supply of ambulatory oxygen. The HomeFill Oxygen System allows the patient to breathe at home from a continuous flow concentrator and then use a convenient ambulatory pack when they are away from the home doing the most important work - visiting family and friends or even more important GRANDKIDS!

What are the Benefits of the Invacare Homefill System?

The Invacare HomeFill Oxygen System offers patients a number of different cylinder options to better meet their needs. Whether you need integrated conserver cylinders, post valve style cylinders or something else; Invacare has a HomeFill kit to meet your needs featuring:

Used Invacare Homefill Oxygen System
  • Provides an unlimited refillable ambulatory oxygen supply
  • Patient breathes from a continuous flow oxygen concentrator at night
  • Allows greater mobility than traditional oxygen modalities
  • Fosters independence for ambulatory oxygen
  • Patient protection ensures oxygen purity in cylinder is always greater than 90%
  • Easy cylinder connections with the OxyLock Coupler

Where should the Invacare Homefill System be used?

The compressor should be at least three inches away from walls, draperies or furniture to ensure sufficient air flow. Avoid placing the compressor next to heaters, radiators or hot air registers. DO NOT use in a closet. The compressor should sit on a hard flat stable surface, such as a table.

Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air opening may be blocked. If the compressor has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or submersed in water, call a qualified technician for examination and repair. The unit is provided with double insulation and has no serviceable parts

The Invacare Homefill System works off your current Compressor to fill the prescribed cylinder options:

Tank Size Description Overall Height: Diameter: Product Weight: Flow Setting: Capacity:
D Invacare HomeFill Post Valve Cylinder - D 21" 4.38" 6.5 lb. N/A 422 L
M9 Invacare HomeFill Post Valve Cylinder - M9 15" 4.38" 5.4 lb. N/A 255 L
ML6 Invacare HomeFill Post Valve Cylinder - ML6 12" 4.38" 4.2 lb. N/A 170 L

Connecting/Disconnecting the Cylinder to/from the Compressor

  1. Examine the cylinder gauge. If the cylinder pressure is less than 1500 psig, proceed to STEP 2. If the cylinder pressure is greater than 1500 psig, DO NOT attempt to top off this cylinder. It may not fill.
  2. Set the regulator flow dial on the cylinder to Off.
  3. Remove the cylinder and connector fillport covers (if present).
  4. Momentarily push DOWN on the outer ring (sleeve) of the connector fillport until GREEN dots are visible to reset the connector.
Invacare Perfecto 2 Invacare Perfecto 2 The new Perfecto2 is the smallest, lightest, quietest and most energy efficient 5-liter concentrator ever produced by Invacare
Invacare Platinum XL Invacare Platinum XL The Platinum line of concentrators and provides an attractive alternative to liquid systems. It is available at up to 10 LPM for high flow patients, and has less than 10 parts different from the Platinum XL 5-Liter concentrators.

NOTE: If the outer ring (sleeve) is in the UP position (GREEN dots not visible), the connector fillport will not be able to accept the cylinder fillport. Pushing DOWN momentarily will reset the connector fillport (GREEN dots visible) to accept the cylinder fillport.

Care for your Invacare Homefill System.

Cleaning the Compressor Filter: 1) Unplug the compressor. Grasp the plug not the cord. 2) Remove the filter 3) Clean the filter with a vacuum cleaner or wash in warm soapy water and rinse thoroughly. 4) Dry the filter thoroughly before reinstallation.

For the Cabinet: 1) Clean the cabinet with a mild household cleaner and non-abrasive cloth or sponge.

Pre-Fill Inspection of the Cylinder:

  1. Examine the outside of the cylinder for the following conditions, and replace the cylinder if they exist:
    • Dents or dings
    • Arc burns
    • Oil or grease
    • Any other signs of damage that might cause a cylinder to be unacceptable or unsafe for use.
  2. Examine the cylinder for evidence of fire or thermal damage. Evidence includes charring or blistering of the paint, or other protective coating or heat sensitive indicator. If fire or thermal damage is found, replace the cylinder.
  3. Inspect the cylinder/regulator assembly for the following and replace if found:
    • Debris, oil or grease
    • Noticeable signs of damage
    • Signs of corrosion inside the valve
    • Signs of excessive heat or fire damage

Trouble Shooting

  1. No indicator lights on when compressor is turned on A) Turn compressor off B) Check that power cord is properly plugged into compressor and wall outlets C) Turn the compressor On. D) Clean air filters E) If performing steps 1-4 does not cause any indicator lights to come on, contact your home health care provider.
  2. Red Light On A) Check the cylinder guage to see if it is Full. If cylinder is full, remove the cylinder and turn the unit off. Perform the cylinder prefill Inspection with a cylinder that is not full. Cylinder is not full proceed to step B. B) Check that the cylinder is connected properly C) Turn the compressor off. D) Remove the cylinder and reinstall. E) Turn the compressor on. If cylinder is not full and is connected properly, the compressor may have internal failure. Contact your home health provider.